11/18/2023 0 Comments Timber wolf bandsaw bladeEven though they cost more, they are a good choice for resawing and because they can be resharpened several times, will still be a cost effective choice for that. Even if they didn't last longer than the WS, it would still be a better cost equation.'ĮDIT to add: I have not tried a Carbide blade but my research indicates that they are not a good choice for milling green wood. ![]() 3 woodslicers for the same saw, with shipping would be $150. Timber Brute, and the Champion 25-ton Horizontal/Vertical Gas Log Splitter. The total came to $110, including shipping. I recently bought 3 blades from them (2 for roughing green bowl blanks and one veneer blade). 032 thick, have an alternate set and a unique rake angle of 8.5 degrees.They also utilize the unique geometry of our PC gullet.These bands. I had a high-end blade by another vendor that was good, but not even close to this one Cuts real nice and effectively I believe the low-tension aspect makes a huge difference as well. I have found that the cheapest place to buy TW blades is usually directly from them. Timber Wolf Alternate Set (AS) Series - for green or exotic wood available in 3/8' and 1/2' x 3 tpi.These small blades are unique in their body thickness, set, and rake angle.They are. 1/2' x 2/3VPC Series Timber Wolf band saw blades. It is about 8 years old and still cuts well after dozens of logs. ![]() My very first TW blade is used exclusively for milling green logs. They have several blades for milling green wood and they seem to last forever, not that I have not worn any of them out. It specifically says on the TW website not to use it in green wood. For example, they have a relatively new blade for cutting veneer that makes nearly as smooth of a cut as the Woodslicer but lasts at least 3 times as long, in my experience, so I have switched to using it instead of the WS. Timberwolf makes a bunch of different blades for different applications and using the right kind of blade makes all of the difference. I didn't watch the entire video but at the beginning he just said "a Timberwolf blade". TIMBER WOLF® BLADES The world’s only Thin kerf, low tension, silicon Steel band saw & mill blades Created in 1990 by Art Gschwind and Suffolk machinery corp. ![]() It does not say on the HWW website but I suspect that the WS is designed for dry wood so using it to saw wet logs will dull it even faster. At first it is really is a joy to use but it dulls so fast that I quickly end up swearing at it. Old post but my 2 cents.I loved the Woodslicer for cutting veneer and resawing in general because when new it cuts easily and leaves a very smooth face.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |